Regardless whether it’s for your own security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are always operational is necessary. In reality, bulbs are wearing auto parts that will obviously burn out after a while and as a result need to be changed. You’re quite likely here because one of your parking lights is burnt out and you’re struggling with how to change your Jaguar F Pace’s license plate bulb, we’ve created this document to help you do it on your own and not have to go to your auto mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Jaguar F Pace.

change-license-plate-bulb-jaguar-f-pace

How to swap the license plate bulb on your Jaguar F Pace through the outside

This technique is the quickest of the two, in reality, for this one you will simply require to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second section of this content page to clarify the way.
So let’s start with swapping the number plate bulb by going through the outside of your Jaguar F Pace. Regardless whether it’s the front or the back of your car the process will be the same.
Here are a few simple guidelines to stick to to execute this routine service:

  • With the engine turned off, unplug the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this goal (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Jaguar F Pace
  • .

  • Use your screwdriver or knife to eject the bulb from its placement, if you are worried of damaging a thing, you can also do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and test the light to validate the successfulness of the procedure.

How to change the number plate bulb on your Jaguar F Pace without outside access

Second section of our content page, change this license plate bulb on your Jaguar F Pace without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).

How to swap the front license plate bulb on my Jaguar F Pace

To swap the one on the front plate, nothing could be easier, you will have to position yourself under the car (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to apply too much force or you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.

How to swap the rear license plate bulb on my Jaguar F Pace

Finally last solution, you must swap the bulb on the backplate of your Jaguar F Pace, but you cannot open the cover from the outside of your car. In this case, here is the tactic to operate this operation:

  • Unplug the battery from your Jaguar F Pace
  • Locate the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
  • Once found, before removing the bulb holders, unplug the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Jaguar F Pace, test it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have discovered the main solutions for swapping license plate bulbs on your car, remember that on some models the method may be a bit different but you should be able to realize it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Jaguar F Pace. If you need to change other bulbs like the position light bulbs on your Jaguar F Pace or the low beam bulbs on Jaguar F Pace, don’t be reluctant to browse our articles which demonstrate you the procedure to follow.

If you need more guides on the Jaguar F Pace, go to our Jaguar F Pace category.