Regardless whether it’s for your own personal security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are in every case effective is very important. In fact, bulbs are wearing units that will surely burn out after some time and as a result need to be replaced. You’re most certainly here because one of your parking lights is burnt out and you’re struggling with how to change your Jaguar E-Pace’s license plate bulb, we’ve made this article to help you do it without any help and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Jaguar E-Pace.
How to change the license plate bulb on your Jaguar E-Pace coming from the outside
This method is the quickest of the two, in truth, for this one you will simply need to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will spend some time on in the second part of this content to describe the method.
So let’s begin with swapping the number plate bulb by going through the outside of your Jaguar E-Pace. Regardless whether it’s the front or the back of your automobile the process will be similar.
Here are a few simple actions to follow to conduct this service:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this purpose (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Jaguar E-Pace
- Use your screwdriver or knife to eject the bulb from its placement, if you are worried of breaking anything, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to validate the success of the process.
.
How to change the number plate bulb on your Jaguar E-Pace without outside access
Second part of our article, swap this license plate bulb on your Jaguar E-Pace without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Jaguar E-Pace
To change the one on the front plate, nothing could be simpler, you will have to put yourself under the automobile (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to apply too much pressure otherwise you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Jaguar E-Pace
Finally last option, you must change the bulb on the backplate of your Jaguar E-Pace, but you are not able to open the cover from the outside of your automobile. In this case, here is the technique to do this operation:
- Unplug the battery from your Jaguar E-Pace
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Jaguar E-Pace, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main solutions for swapping license plate bulbs on your car, remember that on some models the methodology may be a bit different but you should be able to do it following the outline of this content. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Jaguar E-Pace. If you wish to change other bulbs like the position light bulbs on your Jaguar E-Pace or the low beam bulbs on Jaguar E-Pace, don’t hesitate to read our content articles which describe you the procedure to follow.
If you have any further questions about the Jaguar E-Pace, do not hesitate to consult our Jaguar E-Pace category.
