Regardless whether it’s for your own security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are all the time functional is fundamental. Indeed, bulbs are wearing auto parts that will inevitably burn out in the future and therefore need to be replaced. You’re perhaps here because one of your parking lights is burnt out and you’re questioning how to change your Infiniti QX70’s license plate bulb, we’ve made this content to help you do it all on your own and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Infiniti QX70.
How to replace the license plate bulb on your Infiniti QX70 coming from the outside
This solution is the simplest of the two, in truth, for this one you will simply need to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second part of this article to show you the approach.
So let’s begin with swapping the number plate bulb by going through the outside of your Infiniti QX70. Regardless whether it’s the front or the back of your car the technique will be similar.
Here are a few simple guidelines to stick to to perform this maintenance tasks:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this intent (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Infiniti QX70
- Use your screwdriver or knife to eject the bulb from its placement, in the event you are afraid of damaging a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to validate the successfulness of the operation.
.
How to replace the number plate bulb on your Infiniti QX70 without outside access
Second part of our content, swap this license plate bulb on your Infiniti QX70 without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Infiniti QX70
To replace the one on the front plate, nothing could be much easier, you will have to position yourself under the car (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general held by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to put in too much force or you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Infiniti QX70
Finally last possibility, you must replace the bulb on the backplate of your Infiniti QX70, but you are not able to open the cover from the outside of your car. In this instance, here is the solution to operate this operation:
- Unplug the battery from your Infiniti QX70
- Identify the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Infiniti QX70, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main ways for swapping license plate bulbs on your car, take notice that on some models the methodology may be a bit different but you should be able to realize it following the outline of this document. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Infiniti QX70. If you desire to change other bulbs like the position light bulbs on your Infiniti QX70 or the low beam bulbs on Infiniti QX70, don’t be reluctant to consult our content articles which explain you the process to follow.
To find more tips on the Infiniti QX70, take a look at the Infiniti QX70 category.
