Whether it’s for your personal safety, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are always functioning is very important. Indeed, bulbs are wearing parts that will surely burn out over time and consequently need to be changed. You’re almost certainly on this site because one of your parking lights is burnt out and you’re worried about how to change your Infiniti QX60’s license plate bulb, we’ve written and published this article content to help you do it on your own and not have to go to your auto mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Infiniti QX60.

change-license-plate-bulb-infiniti-qx60

How to swap the license plate bulb on your Infiniti QX60 throughout the outside

This process is the simplest of the two, actually, for this one you will just need to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second part of this document to clarify the way.
So let’s start with swapping the number plate bulb by going through the outside of your Infiniti QX60. Whether it’s the front or the back of your motor vehicle the technique will be similar.
Here are a few simple actions to stick to to perform this maintenance:

  • With the engine off, unplug the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Infiniti QX60
  • .

  • Use your screwdriver or knife to eject the bulb from its place, in the event that you are afraid of damaging something, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and test the light to confirm the success of the operation.

How to change the number plate bulb on your Infiniti QX60 without outside access

Second part of our content page, replace this license plate bulb on your Infiniti QX60 without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).

How to swap the front license plate bulb on my Infiniti QX60

To swap the one on the front plate, nothing could be simpler, you will have to put yourself under the motor vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to exert too much force otherwise you will break the plastic cover), and you will just have to take off the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.

How to swap the rear license plate bulb on my Infiniti QX60

Finally last option, you must swap the bulb on the backplate of your Infiniti QX60, but you simply cannot open the cover from the outside of your motor vehicle. In this case, here is the approach to operate this operation:

  • Disconnect the battery from your Infiniti QX60
  • Identify the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, unplug the holders for much easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Infiniti QX60, test it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have learned the main solutions for swapping license plate bulbs on your car, take note that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this article content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Infiniti QX60. If you need to change other bulbs like the position light bulbs on your Infiniti QX60 or the low beam bulbs on Infiniti QX60, don’t be reluctant to browse our articles which demonstrate you the procedure to follow.

Whenever you have any additional questions about the Infiniti QX60, do not hesitate to consult our Infiniti QX60 category.