Regardless whether it’s for your personal safety, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are in every case operational is really important. In reality, bulbs are wearing units that will surely burn out in the future and as a consequence need to be changed. You’re quite likely in this article because one of your parking lights is burnt out and you’re questioning how to change your Infiniti QX50’s license plate bulb, we’ve made this content page to help you do it without any help and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Infiniti QX50.
How to change the license plate bulb on your Infiniti QX50 throughout the outside
This process is the easiest of the two, in fact, for this one you will only have to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will take a moment on in the second section of this article to demonstrate the approach.
So let’s begin with replacing the number plate bulb by going through the outside of your Infiniti QX50. Regardless whether it’s the front or the back of your car the procedure will be the same.
Here are a few simple guidelines to follow to execute this maintenance:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this goal (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Infiniti QX50
- Use your screwdriver or knife to eject the bulb from its placement, in the event that you are afraid of destroying a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to validate the achievement of the task.
.
How to change the number plate bulb on your Infiniti QX50 without outside access
Second section of our document, swap this license plate bulb on your Infiniti QX50 without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Infiniti QX50
To change the one on the front plate, nothing could be less complicated, you will have to position yourself under the car (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to exert too much force otherwise you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.
How to change the rear license plate bulb on my Infiniti QX50
Finally last possibility, you must change the bulb on the backplate of your Infiniti QX50, but you cannot open the cover from the outside of your car. In this instance, here is the technique to conduct this operation:
- Disconnect the battery from your Infiniti QX50
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Infiniti QX50, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main approaches for replacing license plate bulbs on your car, bear in mind that on some models the methodology may be a bit different but you should be able to do it following the outline of this content. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Infiniti QX50. If you wish to change other bulbs like the position light bulbs on your Infiniti QX50 or the low beam bulbs on Infiniti QX50, don’t hesitate to browse our content articles which explain you the procedure to follow.
To discover more tips on the Infiniti QX50, take a look at the Infiniti QX50 category.
