Regardless it’s for your own personal security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are all the time working is very important. In reality, bulbs are wearing units that will surely burn out over the years and therefore need to be swapped out. You’re perhaps here because one of your parking lights is burnt out and you’re wanting to know how to change your Hyundai Veloster’s license plate bulb, we’ve made this article content to help you do it by yourself and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Hyundai Veloster.
How to replace the license plate bulb on your Hyundai Veloster through the outside
This solution is the quickest of the two, in reality, for this one you will simply need to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second part of this content to demonstrate the method.
So let’s begin with swapping the number plate bulb by going through the outside of your Hyundai Veloster. Regardless it’s the front or the back of your automobile the process will be similar.
Here are a few simple actions to follow to execute this routine service:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this purpose (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Hyundai Veloster
- Use your screwdriver or knife to eject the bulb from its place, in the event that you are worried of destroying anything, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to validate the achievement of the operation.
.
How to replace the number plate bulb on your Hyundai Veloster without outside access
Second part of our item, replace this license plate bulb on your Hyundai Veloster without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Hyundai Veloster
To replace the one on the front plate, nothing could be simpler, you will have to put yourself under the automobile (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to apply too much force otherwise you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Hyundai Veloster
Finally last possibility, you must replace the bulb on the backplate of your Hyundai Veloster, but you cannot open the cover from the outside of your automobile. In this instance, here is the approach to accomplish this operation:
- Disconnect the battery from your Hyundai Veloster
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Hyundai Veloster, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main methods for swapping license plate bulbs on your car, bear in mind that on some models the methodology may be a bit different but you should be able to accomplish it following the outline of this article content. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Hyundai Veloster. If you need to change other bulbs like the position light bulbs on your Hyundai Veloster or the low beam bulbs on Hyundai Veloster, don’t hesitate to consult our articles which describe you the operation to follow.
To discover more tips on the Hyundai Veloster, take a look at the Hyundai Veloster category.
