Whether it’s for your own personal safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are all the time operational is extremely important. In reality, bulbs are wearing auto parts that will undoubtedly burn out in the future and as a consequence need to be replaced. You’re almost certainly on this website because one of your parking lights is burnt out and you’re worried about how to change your Hyundai Sonata’s license plate bulb, we’ve written this document to help you do it without any help and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Hyundai Sonata.

change-license-plate-bulb-hyundai-sonata

How to swap the license plate bulb on your Hyundai Sonata through the outside

This process is the most simple of the two, in truth, for this one you will only require to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second part of this document to teach you the approach.
So let’s start with swapping the number plate bulb by going through the outside of your Hyundai Sonata. Whether it’s the front or the back of your vehicle the procedure will be similar.
Here are a few simple actions to stick to to carry out this service:

  • With the engine off, unplug the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this purpose (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Hyundai Sonata
  • .

  • Use your screwdriver or knife to eject the bulb from its placement, in the event you are worried of damaging anything, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and test the light to confirm the successfulness of the task.

How to change the number plate bulb on your Hyundai Sonata without outside access

Second part of our article, change this license plate bulb on your Hyundai Sonata without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).

How to swap the front license plate bulb on my Hyundai Sonata

To swap the one on the front plate, nothing could be much easier, you will have to put yourself under the vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much force or you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.

How to swap the rear license plate bulb on my Hyundai Sonata

Finally last solution, you must swap the bulb on the backplate of your Hyundai Sonata, but you cannot really open the cover from the outside of your vehicle. In this instance, here is the solution to do this operation:

  • Disconnect the battery from your Hyundai Sonata
  • Locate the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, unplug the holders for less complicated access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Hyundai Sonata, test it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have learned the main methods for swapping license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to do it following the explanation of this content page. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Hyundai Sonata. If you want to change other bulbs like the position light bulbs on your Hyundai Sonata or the low beam bulbs on Hyundai Sonata, don’t be reluctant to browse our content articles which describe you the process to follow.

To find more tips on the Hyundai Sonata, take a look at the Hyundai Sonata category.