Regardless whether it’s for your specific security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are constantly working is necessary. In reality, bulbs are wearing units that will obviously burn out over time and therefore need to be replaced. You’re almost certainly on the website because one of your parking lights is burnt out and you’re wondering how to change your Hyundai Ix20’s license plate bulb, we’ve written and published this article to help you do it all on your own and not have to go to your mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Hyundai Ix20.
How to replace the license plate bulb on your Hyundai Ix20 throughout the outside
This approach is the fastest of the two, in truth, for this one you will simply have to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second section of this document to teach you the approach.
So let’s begin with changing the number plate bulb by going through the outside of your Hyundai Ix20. Regardless whether it’s the front or the back of your automobile the operation will be identical.
Here are a few simple guidelines to stick to to execute this maintenance tasks:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this purpose (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Hyundai Ix20
- Use your screwdriver or knife to eject the bulb from its place, in the event that you are worried of damaging anything, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the achievement of the procedure.
.
How to replace the number plate bulb on your Hyundai Ix20 without outside access
Second section of our item, change this license plate bulb on your Hyundai Ix20 without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Hyundai Ix20
To replace the one on the front plate, nothing could be less difficult, you will have to position yourself under the automobile (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general held by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to exert too much pressure otherwise you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Hyundai Ix20
Finally last solution, you must replace the bulb on the backplate of your Hyundai Ix20, but you are not able to open the cover from the outside of your automobile. In this instance, here is the technique to perform this task:
- Unplug the battery from your Hyundai Ix20
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Hyundai Ix20, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main methods for changing license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to do it following the outline of this content. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Hyundai Ix20. If you need to change other bulbs like the position light bulbs on your Hyundai Ix20 or the low beam bulbs on Hyundai Ix20, don’t be reluctant to consult our content articles which explain you the process to follow.
To find more tips on the Hyundai Ix20, take a look at the Hyundai Ix20 category.
