Whether it’s for your personal safety, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are in every case functioning is extremely important. In fact, bulbs are wearing units that will inevitably burn out after some time and as a consequence need to be replaced. You’re most certainly here because one of your parking lights is burnt out and you’re wondering how to change your Hyundai Ioniq’s license plate bulb, we’ve made this content page to help you do it all on your own and not have to go to your technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Hyundai Ioniq.
How to change the license plate bulb on your Hyundai Ioniq through the outside
This option is the easiest of the two, in fact, for this one you will simply need to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second part of this article to show you the method.
So let’s begin with swapping the number plate bulb by going through the outside of your Hyundai Ioniq. Whether it’s the front or the back of your car the procedure will be identical.
Here are a few simple steps to follow to conduct this routine service:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Hyundai Ioniq
- Use your screwdriver or knife to remove the bulb from its spot, in the event you are worried of breaking a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the success of the procedure.
.
How to replace the number plate bulb on your Hyundai Ioniq without outside access
Second part of our article, swap this license plate bulb on your Hyundai Ioniq without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Hyundai Ioniq
To change the one on the front plate, nothing could be less complicated, you will have to put yourself under the car (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually held by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much force or you will break the plastic cover), and you will only have to take out the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to change the rear license plate bulb on my Hyundai Ioniq
Finally last possibility, you must change the bulb on the backplate of your Hyundai Ioniq, but you cannot open the cover from the outside of your car. In this case, here is the technique to perform this operation:
- Disconnect the battery from your Hyundai Ioniq
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Hyundai Ioniq, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main techniques for swapping license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to accomplish it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Hyundai Ioniq. If you wish to change other bulbs like the position light bulbs on your Hyundai Ioniq or the low beam bulbs on Hyundai Ioniq, don’t be reluctant to consult our articles which demonstrate you the operation to follow.
Whenever you have any additional questions about the Hyundai Ioniq, do not hesitate to consult our Hyundai Ioniq category.
