It doesn’t matter if it’s for your personal security, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are always working is really important. Indeed, bulbs are wearing parts that will inevitably burn out after awhile and as a result need to be swapped out. You’re most likely on this website because one of your parking lights is burnt out and you’re struggling with how to change your Hyundai Elantra’s license plate bulb, we’ve created this article content to help you do it all on your own and not have to go to your auto mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Hyundai Elantra.

change-license-plate-bulb-hyundai-elantra

How to replace the license plate bulb on your Hyundai Elantra throughout the outside

This technique is the simplest of the two, in truth, for this one you will just require to remove the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this article to explain the method.
So let’s begin with swapping the number plate bulb by going through the outside of your Hyundai Elantra. It doesn’t matter if it’s the front or the back of your car the method will be the same.
Here are a few simple actions to follow to conduct this service:

  • With the engine off, unplug the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this purpose (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Hyundai Elantra
  • .

  • Use your screwdriver or knife to eject the bulb from its placement, in the event that you are afraid of destroying something, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and test the light to validate the achievement of the procedure.

How to change the number plate bulb on your Hyundai Elantra without outside access

Second part of our article, change this license plate bulb on your Hyundai Elantra without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Hyundai Elantra

To replace the one on the front plate, nothing could be less difficult, you will have to put yourself under the car (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to put in too much pressure or you will break the plastic cover), and you will just have to remove the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.

How to replace the rear license plate bulb on my Hyundai Elantra

Finally last solution, you must replace the bulb on the backplate of your Hyundai Elantra, but you cannot really open the cover from the outside of your car. In this case, here is the solution to operate this operation:

  • Disconnect the battery from your Hyundai Elantra
  • Identify the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
  • Once found, before removing the bulb holders, unplug the holders for less complicated access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Hyundai Elantra, test it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have learned the main methods for swapping license plate bulbs on your car, take notice that on some models the methodology may be a bit different but you should be able to accomplish it following the outline of this article content. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Hyundai Elantra. If you want to change other bulbs like the position light bulbs on your Hyundai Elantra or the low beam bulbs on Hyundai Elantra, don’t be reluctant to consult our articles which demonstrate you the procedure to follow.

If you want more guides on the Hyundai Elantra, go to our Hyundai Elantra category.