Regardless whether it’s for your specific safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are constantly effective is very important. Indeed, bulbs are wearing units that will surely burn out after some time and consequently need to be changed. You’re almost certainly on this website because one of your parking lights is burnt out and you’re worried about how to change your Hyundai Accent’s license plate bulb, we’ve created this document to help you do it all on your own and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Hyundai Accent.
How to swap the license plate bulb on your Hyundai Accent coming from the outside
This process is the simplest of the two, in truth, for this one you will simply need to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second section of this content to describe the method.
So let’s begin with swapping the number plate bulb by going through the outside of your Hyundai Accent. Regardless whether it’s the front or the back of your car the method will be identical.
Here are a few simple steps to follow to conduct this service:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this goal (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Hyundai Accent
- Use your screwdriver or knife to eject the bulb from its place, in the event you are scared of breaking anything, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to validate the success of the task.
.
How to change the number plate bulb on your Hyundai Accent without outside access
Second section of our item, swap this license plate bulb on your Hyundai Accent without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Hyundai Accent
To swap the one on the front plate, nothing could be easier, you will have to position yourself under the car (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to put in too much force or you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.
How to swap the rear license plate bulb on my Hyundai Accent
Finally last solution, you must swap the bulb on the backplate of your Hyundai Accent, but you simply cannot open the cover from the outside of your car. In this instance, here is the process to operate this task:
- Unplug the battery from your Hyundai Accent
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Hyundai Accent, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for swapping license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to accomplish it following the outline of this article content. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Hyundai Accent. If you want to change other bulbs like the position light bulbs on your Hyundai Accent or the low beam bulbs on Hyundai Accent, don’t be reluctant to read our content articles which demonstrate you the procedure to follow.
To find more tips on the Hyundai Accent, take a look at the Hyundai Accent category.
