It doesn’t matter if it’s for your own personal safety, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly effective is very important. In fact, bulbs are wearing parts that will surely burn out after awhile and therefore need to be replaced. You’re most likely here because one of your parking lights is burnt out and you’re wondering how to change your Honda Odyssey’s license plate bulb, we’ve made this article content to help you do it without any help and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Honda Odyssey.
How to change the license plate bulb on your Honda Odyssey coming from the outside
This solution is the simplest of the two, in truth, for this one you will only have to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate a moment on in the second section of this document to show you the method.
So let’s start with changing the number plate bulb by going through the outside of your Honda Odyssey. It doesn’t matter if it’s the front or the back of your automobile the method will be the same.
Here are a few simple guidelines to follow to conduct this service:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this intent (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Honda Odyssey
- Use your screwdriver or knife to remove the bulb from its location, in the event that you are scared of damaging anything, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the success of the process.
.
How to change the number plate bulb on your Honda Odyssey without outside access
Second section of our article, change this license plate bulb on your Honda Odyssey without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Honda Odyssey
To change the one on the front plate, nothing could be much easier, you will have to put yourself under the automobile (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take away the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to exert too much force or you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Honda Odyssey
Finally last option, you must change the bulb on the backplate of your Honda Odyssey, but you simply cannot open the cover from the outside of your automobile. In such a case, here is the approach to operate this operation:
- Unplug the battery from your Honda Odyssey
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Honda Odyssey, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main methods for changing license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to realize it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Honda Odyssey. If you need to change other bulbs like the position light bulbs on your Honda Odyssey or the low beam bulbs on Honda Odyssey, don’t be reluctant to consult our content articles which describe you the operation to follow.
If you need more guides on the Honda Odyssey, go to our Honda Odyssey category.
