Whether it’s for your own safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are always functioning is really important. In fact, bulbs are wearing auto parts that will undoubtedly burn out after awhile and as a result need to be swapped out. You’re perhaps here because one of your parking lights is burnt out and you’re wanting to know how to change your Honda Civic’s license plate bulb, we’ve created this document to help you do it on your own and not have to go to your technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Honda Civic.
How to swap the license plate bulb on your Honda Civic through the outside
This method is the quickest of the two, in truth, for this one you will only have to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this content to demonstrate the approach.
So let’s begin with swapping the number plate bulb by going through the outside of your Honda Civic. Whether it’s the front or the back of your motor vehicle the method will be identical.
Here are a few simple actions to stick to to carry out this maintenance tasks:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this purpose (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Honda Civic
- Use your screwdriver or knife to remove the bulb from its location, in the event you are scared of destroying anything, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to validate the successfulness of the procedure.
.
How to replace the number plate bulb on your Honda Civic without outside access
Second part of our article, swap this license plate bulb on your Honda Civic without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Honda Civic
To swap the one on the front plate, nothing could be easier, you will have to position yourself under the motor vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly kept by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to put in too much pressure otherwise you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Honda Civic
Finally last option, you must swap the bulb on the backplate of your Honda Civic, but you are not able to open the cover from the outside of your motor vehicle. In such a case, here is the technique to carry out this operation:
- Disconnect the battery from your Honda Civic
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Honda Civic, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main tactics for swapping license plate bulbs on your car, take note that on some models the technique may be a bit different but you should be able to realize it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Honda Civic. If you want to change other bulbs like the position light bulbs on your Honda Civic or the low beam bulbs on Honda Civic, don’t be reluctant to consult our articles which demonstrate you the operation to follow.
If you need more tutorials on the Honda Civic, go to our Honda Civic category.
