It doesn’t matter if it’s for your own safety, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are constantly operational is fundamental. In fact, bulbs are wearing units that will obviously burn out over time and as a consequence need to be changed. You’re almost certainly in this article because one of your parking lights is burnt out and you’re wondering how to change your Honda Accord’s license plate bulb, we’ve written this content to help you do it all on your own and not have to go to your technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Honda Accord.
How to swap the license plate bulb on your Honda Accord through the outside
This option is the fastest of the two, in truth, for this one you will simply have to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second section of this document to explain the approach.
So let’s start with replacing the number plate bulb by going through the outside of your Honda Accord. It doesn’t matter if it’s the front or the back of your motor vehicle the procedure will be similar.
Here are a few simple actions to stick to to conduct this maintenance:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this purpose (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Honda Accord
- Use your screwdriver or knife to remove the bulb from its placement, in the event you are worried of destroying something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the successfulness of the procedure.
.
How to change the number plate bulb on your Honda Accord without outside access
Second section of our content page, replace this license plate bulb on your Honda Accord without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Honda Accord
To swap the one on the front plate, nothing could be simpler, you will have to position yourself under the motor vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to put in too much pressure or you will break the plastic cover), and you will only have to take out the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.
How to swap the rear license plate bulb on my Honda Accord
Finally last possibility, you must swap the bulb on the backplate of your Honda Accord, but you cannot open the cover from the outside of your motor vehicle. In such a case, here is the technique to carry out this task:
- Unplug the battery from your Honda Accord
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Honda Accord, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main approaches for replacing license plate bulbs on your car, remember that on some models the technique may be a bit different but you should be able to do it following the explanation of this content page. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Honda Accord. If you wish to change other bulbs like the position light bulbs on your Honda Accord or the low beam bulbs on Honda Accord, don’t be reluctant to read our articles which explain you the process to follow.
If you have any additional questions about the Honda Accord, do not hesitate to consult our Honda Accord category.
