Whether it’s for your personal safety, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are in every case working is very important. Indeed, bulbs are wearing units that will predictably burn out after awhile and as a consequence need to be replaced. You’re most certainly on this website because one of your parking lights is burnt out and you’re questioning how to change your Ford Transit’s license plate bulb, we’ve written this content page to help you do it all on your own and not have to go to your technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Ford Transit.

change-license-plate-bulb-ford-transit

How to replace the license plate bulb on your Ford Transit coming from the outside

This option is the simplest of the two, in reality, for this one you will simply require to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will take some time on in the second part of this article to clarify the method.
So let’s start with changing the number plate bulb by going through the outside of your Ford Transit. Whether it’s the front or the back of your motor vehicle the operation will be identical.
Here are a few simple steps to follow to carry out this maintenance tasks:

  • With the engine turned off, disconnect the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this goal (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Ford Transit
  • .

  • Use your screwdriver or knife to eject the bulb from its place, in the event you are worried of breaking a thing, you can as well do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and test the light to confirm the achievement of the operation.

How to replace the number plate bulb on your Ford Transit without outside access

Second part of our content, swap this license plate bulb on your Ford Transit without external access. In most cases you will be able to access it, however some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Ford Transit

To replace the one on the front plate, nothing could be less complicated, you will have to put yourself under the motor vehicle (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to put in too much pressure otherwise you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.

How to replace the rear license plate bulb on my Ford Transit

Finally last possibility, you must replace the bulb on the backplate of your Ford Transit, but you cannot really open the cover from the outside of your motor vehicle. In this case, here is the process to accomplish this task:

  • Disconnect the battery from your Ford Transit
  • Locate the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, disconnect the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Ford Transit, test it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have learned the main methods for changing license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to realize it following the explanation of this content page. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Ford Transit. If you wish to change other bulbs like the position light bulbs on your Ford Transit or the low beam bulbs on Ford Transit, don’t hesitate to read our content articles which explain you the operation to follow.

If you need more tutorials on the Ford Transit, go to our Ford Transit category.