Regardless it’s for your own personal safety, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are all the time functioning is extremely important. Indeed, bulbs are wearing units that will undoubtedly burn out after awhile and as a result need to be swapped out. You’re probably on the website because one of your parking lights is burnt out and you’re wondering how to change your Ford Mustang’s license plate bulb, we’ve created this document to help you do it by yourself and not have to go to your motor mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Ford Mustang.
How to swap the license plate bulb on your Ford Mustang coming from the outside
This approach is the fastest of the two, in fact, for this one you will simply need to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second part of this content to teach you the method.
So let’s begin with changing the number plate bulb by going through the outside of your Ford Mustang. Regardless it’s the front or the back of your car the method will be identical.
Here are a few simple guidelines to follow to conduct this maintenance tasks:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Ford Mustang
- Use your screwdriver or knife to eject the bulb from its spot, in the event you are afraid of breaking something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to validate the achievement of the process.
.
How to change the number plate bulb on your Ford Mustang without outside access
Second part of our item, replace this license plate bulb on your Ford Mustang without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Ford Mustang
To swap the one on the front plate, nothing could be less difficult, you will have to position yourself under the car (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually held by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to apply too much force otherwise you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Ford Mustang
Finally last solution, you must swap the bulb on the backplate of your Ford Mustang, but you are not able to open the cover from the outside of your car. In this case, here is the method to conduct this operation:
- Disconnect the battery from your Ford Mustang
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Ford Mustang, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main solutions for changing license plate bulbs on your car, remember that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this content page. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Ford Mustang. If you wish to change other bulbs like the position light bulbs on your Ford Mustang or the low beam bulbs on Ford Mustang, don’t be reluctant to read our content articles which demonstrate you the operation to follow.
To get more tips on the Ford Mustang, take a look at the Ford Mustang category.
