Regardless whether it’s for your personal security, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are always functional is fundamental. Indeed, bulbs are wearing units that will inevitably burn out after some time and consequently need to be swapped out. You’re almost certainly on the website because one of your parking lights is burnt out and you’re worried about how to change your Ford Mondeo’s license plate bulb, we’ve made this article content to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Ford Mondeo.
How to change the license plate bulb on your Ford Mondeo coming from the outside
This option is the easiest of the two, in reality, for this one you will just have to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second part of this article content to demonstrate the approach.
So let’s begin with swapping the number plate bulb by going through the outside of your Ford Mondeo. Regardless whether it’s the front or the back of your car the technique will be the same.
Here are a few simple steps to follow to carry out this maintenance tasks:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this goal (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Ford Mondeo
- Use your screwdriver or knife to remove the bulb from its place, if you are scared of destroying something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the achievement of the task.
.
How to replace the number plate bulb on your Ford Mondeo without outside access
Second part of our item, replace this license plate bulb on your Ford Mondeo without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Ford Mondeo
To change the one on the front plate, nothing could be less hard, you will have to position yourself under the car (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to apply too much pressure or you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to change the rear license plate bulb on my Ford Mondeo
Finally last solution, you must change the bulb on the backplate of your Ford Mondeo, but you simply cannot open the cover from the outside of your car. In such a case, here is the solution to accomplish this operation:
- Unplug the battery from your Ford Mondeo
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Ford Mondeo, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main methods for swapping license plate bulbs on your car, take notice that on some models the methodology may be a bit different but you should be able to accomplish it following the outline of this article. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Ford Mondeo. If you wish to change other bulbs like the position light bulbs on your Ford Mondeo or the low beam bulbs on Ford Mondeo, don’t hesitate to browse our articles which explain you the process to follow.
If you need more guides on the Ford Mondeo, go to our Ford Mondeo category.
