Whether it’s for your personal safety, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are in every case operational is necessary. In reality, bulbs are wearing parts that will obviously burn out as time passes and consequently need to be replaced. You’re quite likely in this article because one of your parking lights is burnt out and you’re worried about how to change your Ford Galaxy’s license plate bulb, we’ve made this content page to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Ford Galaxy.
How to replace the license plate bulb on your Ford Galaxy throughout the outside
This option is the fastest of the two, actually, for this one you will just require to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second part of this document to describe the way.
So let’s start with swapping the number plate bulb by going through the outside of your Ford Galaxy. Whether it’s the front or the back of your motor vehicle the technique will be the same.
Here are a few simple guidelines to stick to to execute this maintenance:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Ford Galaxy
- Use your screwdriver or knife to eject the bulb from its placement, in the event that you are worried of damaging a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to validate the successfulness of the task.
.
How to change the number plate bulb on your Ford Galaxy without outside access
Second part of our article, replace this license plate bulb on your Ford Galaxy without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Ford Galaxy
To replace the one on the front plate, nothing could be less hard, you will have to position yourself under the motor vehicle (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to exert too much pressure otherwise you will break the plastic cover), and you will just have to remove the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.
How to replace the rear license plate bulb on my Ford Galaxy
Finally last option, you must replace the bulb on the backplate of your Ford Galaxy, but you simply cannot open the cover from the outside of your motor vehicle. In this instance, here is the method to do this task:
- Unplug the battery from your Ford Galaxy
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Ford Galaxy, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main solutions for swapping license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to accomplish it following the outline of this content page. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Ford Galaxy. If you want to change other bulbs like the position light bulbs on your Ford Galaxy or the low beam bulbs on Ford Galaxy, don’t be reluctant to browse our content articles which describe you the process to follow.
If you want more guides on the Ford Galaxy, go to our Ford Galaxy category.
