Whether it’s for your own security, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are in every case functional is really important. Indeed, bulbs are wearing parts that will undoubtedly burn out in the future and as a consequence need to be swapped out. You’re perhaps here because one of your parking lights is burnt out and you’re wondering how to change your Ford Fusion’s license plate bulb, we’ve written and published this article content to help you do it on your own and not have to go to your mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Ford Fusion.
How to replace the license plate bulb on your Ford Fusion coming from the outside
This process is the quickest of the two, in truth, for this one you will simply require to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second section of this article to show you the approach.
So let’s start with replacing the number plate bulb by going through the outside of your Ford Fusion. Whether it’s the front or the back of your car the procedure will be the same.
Here are a few simple guidelines to stick to to execute this maintenance:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this intent (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Ford Fusion
- Use your screwdriver or knife to remove the bulb from its placement, in the event you are worried of damaging a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to validate the successfulness of the operation.
.
How to replace the number plate bulb on your Ford Fusion without outside access
Second section of our article, change this license plate bulb on your Ford Fusion without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Ford Fusion
To replace the one on the front plate, nothing could be less hard, you will have to put yourself under the car (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to put in too much force otherwise you will break the plastic cover), and you will just have to remove the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Ford Fusion
Finally last possibility, you must replace the bulb on the backplate of your Ford Fusion, but you cannot really open the cover from the outside of your car. In this instance, here is the solution to operate this operation:
- Unplug the battery from your Ford Fusion
- Identify the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Ford Fusion, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main solutions for replacing license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to realize it following the outline of this content. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Ford Fusion. If you want to change other bulbs like the position light bulbs on your Ford Fusion or the low beam bulbs on Ford Fusion, don’t hesitate to browse our content articles which demonstrate you the operation to follow.
To discover more tips on the Ford Fusion, take a look at the Ford Fusion category.
