Regardless whether it’s for your specific security, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are always effective is extremely important. In fact, bulbs are wearing units that will inevitably burn out over the years and as a consequence need to be swapped out. You’re quite likely on this site because one of your parking lights is burnt out and you’re wanting to know how to change your Ford F 350 ‘s license plate bulb, we’ve written this article content to help you do it on your own and not have to go to your mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Ford F 350 .
How to change the license plate bulb on your Ford F 350 throughout the outside
This solution is the most simple of the two, actually, for this one you will just need to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second section of this content to explain the way.
So let’s begin with changing the number plate bulb by going through the outside of your Ford F 350 . Regardless whether it’s the front or the back of your automobile the technique will be the same.
Here are a few simple actions to follow to conduct this maintenance tasks:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this purpose (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Ford F 350
- Use your screwdriver or knife to eject the bulb from its place, in the event that you are scared of damaging something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to confirm the achievement of the process.
.
How to change the number plate bulb on your Ford F 350 without outside access
Second section of our item, replace this license plate bulb on your Ford F 350 without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Ford F 350
To change the one on the front plate, nothing could be less difficult, you will have to put yourself under the automobile (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general held by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to put in too much force or you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.
How to change the rear license plate bulb on my Ford F 350
Finally last option, you must change the bulb on the backplate of your Ford F 350 , but you simply cannot open the cover from the outside of your automobile. In such a case, here is the method to conduct this task:
- Disconnect the battery from your Ford F 350
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Ford F 350 , test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main ways for changing license plate bulbs on your car, take notice that on some models the technique may be a bit different but you should be able to do it following the explanation of this article content. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Ford F 350 . If you desire to change other bulbs like the position light bulbs on your Ford F 350 or the low beam bulbs on Ford F 350 , don’t be reluctant to read our content articles which describe you the operation to follow.
To get more tips on the Ford F 350 , take a look at the Ford F 350 category.
