Whether it’s for your own personal security, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are constantly working is necessary. Indeed, bulbs are wearing auto parts that will inevitably burn out after a while and as a result need to be changed. You’re perhaps on this site because one of your parking lights is burnt out and you’re questioning how to change your Ford Explorer’s license plate bulb, we’ve written and published this content page to help you do it without any help and not have to go to your technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Ford Explorer.
How to replace the license plate bulb on your Ford Explorer coming from the outside
This option is the fastest of the two, in fact, for this one you will only need to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second part of this article content to show you the approach.
So let’s begin with swapping the number plate bulb by going through the outside of your Ford Explorer. Whether it’s the front or the back of your automobile the procedure will be the same.
Here are a few simple actions to stick to to execute this maintenance tasks:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this purpose (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Ford Explorer
- Use your screwdriver or knife to eject the bulb from its place, if you are scared of destroying something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the successfulness of the task.
.
How to change the number plate bulb on your Ford Explorer without outside access
Second part of our article, change this license plate bulb on your Ford Explorer without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Ford Explorer
To replace the one on the front plate, nothing could be less complicated, you will have to position yourself under the automobile (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly kept by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to exert too much force or you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Ford Explorer
Finally last solution, you must replace the bulb on the backplate of your Ford Explorer, but you cannot really open the cover from the outside of your automobile. In this case, here is the method to conduct this task:
- Unplug the battery from your Ford Explorer
- Identify the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Ford Explorer, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main tactics for swapping license plate bulbs on your car, take note that on some models the method may be a bit different but you should be able to realize it following the explanation of this document. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Ford Explorer. If you wish to change other bulbs like the position light bulbs on your Ford Explorer or the low beam bulbs on Ford Explorer, don’t hesitate to read our articles which explain you the procedure to follow.
To find more tips on the Ford Explorer, take a look at the Ford Explorer category.
