Regardless whether it’s for your specific safety, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are always working is necessary. In fact, bulbs are wearing auto parts that will predictably burn out after awhile and as a consequence need to be changed. You’re almost certainly here because one of your parking lights is burnt out and you’re wanting to know how to change your Ford B-max’s license plate bulb, we’ve created this content page to help you do it on your own and not have to go to your mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Ford B-max.
How to swap the license plate bulb on your Ford B-max through the outside
This tactic is the simplest of the two, in reality, for this one you will just need to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will spend some time on in the second part of this article to clarify the method.
So let’s begin with replacing the number plate bulb by going through the outside of your Ford B-max. Regardless whether it’s the front or the back of your motor vehicle the process will be similar.
Here are a few simple guidelines to follow to perform this maintenance:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this goal (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Ford B-max
- Use your screwdriver or knife to eject the bulb from its spot, in the event you are scared of breaking something, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to validate the successfulness of the process.
.
How to change the number plate bulb on your Ford B-max without outside access
Second part of our item, swap this license plate bulb on your Ford B-max without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Ford B-max
To swap the one on the front plate, nothing could be much easier, you will have to put yourself under the motor vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to put in too much pressure otherwise you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to swap the rear license plate bulb on my Ford B-max
Finally last solution, you must swap the bulb on the backplate of your Ford B-max, but you simply cannot open the cover from the outside of your motor vehicle. In this instance, here is the process to do this operation:
- Unplug the battery from your Ford B-max
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Ford B-max, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for replacing license plate bulbs on your car, take notice that on some models the technique may be a bit different but you should be able to do it following the outline of this document. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Ford B-max. If you need to change other bulbs like the position light bulbs on your Ford B-max or the low beam bulbs on Ford B-max, don’t be reluctant to read our content articles which explain you the operation to follow.
To discover more tips on the Ford B-max, take a look at the Ford B-max category.
