Regardless it’s for your personal security, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are constantly functional is necessary. In fact, bulbs are wearing auto parts that will surely burn out in the future and as a result need to be swapped out. You’re quite likely here because one of your parking lights is burnt out and you’re questioning how to change your Fiat Tipo’s license plate bulb, we’ve written this content to help you do it without any help and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Fiat Tipo.
How to swap the license plate bulb on your Fiat Tipo through the outside
This method is the quickest of the two, in reality, for this one you will simply require to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate a moment on in the second section of this article to demonstrate the method.
So let’s begin with replacing the number plate bulb by going through the outside of your Fiat Tipo. Regardless it’s the front or the back of your automobile the operation will be similar.
Here are a few simple actions to follow to perform this routine service:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this purpose (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Fiat Tipo
- Use your screwdriver or knife to eject the bulb from its placement, in the event you are afraid of destroying something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to confirm the successfulness of the procedure.
.
How to replace the number plate bulb on your Fiat Tipo without outside access
Second section of our item, change this license plate bulb on your Fiat Tipo without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Fiat Tipo
To swap the one on the front plate, nothing could be much easier, you will have to position yourself under the automobile (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to put in too much force or you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.
How to swap the rear license plate bulb on my Fiat Tipo
Finally last option, you must swap the bulb on the backplate of your Fiat Tipo, but you cannot really open the cover from the outside of your automobile. In such a case, here is the method to conduct this task:
- Unplug the battery from your Fiat Tipo
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Fiat Tipo, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main solutions for replacing license plate bulbs on your car, take notice that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this content page. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Fiat Tipo. If you wish to change other bulbs like the position light bulbs on your Fiat Tipo or the low beam bulbs on Fiat Tipo, don’t hesitate to browse our content articles which demonstrate you the operation to follow.
If you wish more guides on the Fiat Tipo, go to our Fiat Tipo category.
