It doesn’t matter if it’s for your personal safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are all the time functioning is necessary. In fact, bulbs are wearing auto parts that will inevitably burn out in the future and consequently need to be changed. You’re probably here because one of your parking lights is burnt out and you’re wondering how to change your Fiat Idea’s license plate bulb, we’ve written and published this article to help you do it without any help and not have to go to your mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Fiat Idea.
How to replace the license plate bulb on your Fiat Idea through the outside
This process is the most simple of the two, in fact, for this one you will simply have to remove the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will spend some time on in the second section of this article to explain the way.
So let’s start with changing the number plate bulb by going through the outside of your Fiat Idea. It doesn’t matter if it’s the front or the back of your car the operation will be similar.
Here are a few simple guidelines to stick to to execute this maintenance:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this intent (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Fiat Idea
- Use your screwdriver or knife to remove the bulb from its placement, in the event you are afraid of damaging a thing, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the success of the process.
.
How to replace the number plate bulb on your Fiat Idea without outside access
Second section of our article, change this license plate bulb on your Fiat Idea without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Fiat Idea
To replace the one on the front plate, nothing could be less complicated, you will have to position yourself under the car (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general held by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to exert too much force otherwise you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Fiat Idea
Finally last option, you must replace the bulb on the backplate of your Fiat Idea, but you cannot open the cover from the outside of your car. In this instance, here is the tactic to execute this operation:
- Disconnect the battery from your Fiat Idea
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Fiat Idea, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main approaches for changing license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to accomplish it following the outline of this content. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Fiat Idea. If you want to change other bulbs like the position light bulbs on your Fiat Idea or the low beam bulbs on Fiat Idea, don’t hesitate to browse our articles which describe you the process to follow.
If you have any further questions about the Fiat Idea, do not hesitate to consult our Fiat Idea category.
