Whether it’s for your personal security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are in every case functional is extremely important. Indeed, bulbs are wearing parts that will predictably burn out after awhile and as a result need to be replaced. You’re probably on this website because one of your parking lights is burnt out and you’re questioning how to change your Fiat Fullback’s license plate bulb, we’ve created this content to help you do it by yourself and not have to go to your technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Fiat Fullback.
How to swap the license plate bulb on your Fiat Fullback through the outside
This process is the simplest of the two, actually, for this one you will only require to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second part of this content page to explain the way.
So let’s begin with changing the number plate bulb by going through the outside of your Fiat Fullback. Whether it’s the front or the back of your vehicle the procedure will be the same.
Here are a few simple steps to follow to conduct this service:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this purpose (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Fiat Fullback
- Use your screwdriver or knife to remove the bulb from its location, in the event that you are afraid of breaking anything, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to validate the achievement of the task.
.
How to replace the number plate bulb on your Fiat Fullback without outside access
Second part of our document, change this license plate bulb on your Fiat Fullback without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Fiat Fullback
To swap the one on the front plate, nothing could be easier, you will have to put yourself under the vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much force otherwise you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.
How to swap the rear license plate bulb on my Fiat Fullback
Finally last option, you must swap the bulb on the backplate of your Fiat Fullback, but you are not able to open the cover from the outside of your vehicle. In such a case, here is the approach to accomplish this task:
- Unplug the battery from your Fiat Fullback
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Fiat Fullback, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main solutions for changing license plate bulbs on your car, take notice that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this article content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Fiat Fullback. If you want to change other bulbs like the position light bulbs on your Fiat Fullback or the low beam bulbs on Fiat Fullback, don’t be reluctant to read our content articles which explain you the process to follow.
To find more tips on the Fiat Fullback, take a look at the Fiat Fullback category.
