It doesn’t matter if it’s for your own personal safety, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are constantly functional is extremely important. In fact, bulbs are wearing auto parts that will predictably burn out over the years and consequently need to be changed. You’re likely here because one of your parking lights is burnt out and you’re wanting to know how to change your Fiat Doblo’s license plate bulb, we’ve written and published this article content to help you do it all on your own and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Fiat Doblo.
How to replace the license plate bulb on your Fiat Doblo coming from the outside
This method is the quickest of the two, in truth, for this one you will only need to remove the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate a moment on in the second part of this article content to show you the approach.
So let’s begin with swapping the number plate bulb by going through the outside of your Fiat Doblo. It doesn’t matter if it’s the front or the back of your car the operation will be similar.
Here are a few simple guidelines to stick to to execute this maintenance:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this purpose (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Fiat Doblo
- Use your screwdriver or knife to remove the bulb from its spot, in the event you are worried of damaging something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to confirm the achievement of the task.
.
How to change the number plate bulb on your Fiat Doblo without outside access
Second part of our content, swap this license plate bulb on your Fiat Doblo without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Fiat Doblo
To replace the one on the front plate, nothing could be simpler, you will have to put yourself under the car (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly held by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to exert too much force or you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.
How to replace the rear license plate bulb on my Fiat Doblo
Finally last possibility, you must replace the bulb on the backplate of your Fiat Doblo, but you are not able to open the cover from the outside of your car. In this instance, here is the tactic to conduct this task:
- Disconnect the battery from your Fiat Doblo
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Fiat Doblo, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main techniques for swapping license plate bulbs on your car, remember that on some models the methodology may be a bit different but you should be able to realize it following the outline of this content. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Fiat Doblo. If you want to change other bulbs like the position light bulbs on your Fiat Doblo or the low beam bulbs on Fiat Doblo, don’t hesitate to browse our articles which demonstrate you the operation to follow.
If you wish more guides on the Fiat Doblo, go to our Fiat Doblo category.
