Regardless it’s for your personal safety, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are constantly working is really important. In reality, bulbs are wearing units that will predictably burn out over the years and as a consequence need to be changed. You’re most certainly on the website because one of your parking lights is burnt out and you’re worried about how to change your Fiat Doblo Cargo’s license plate bulb, we’ve created this article to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Fiat Doblo Cargo.
How to replace the license plate bulb on your Fiat Doblo Cargo coming from the outside
This option is the quickest of the two, in fact, for this one you will simply need to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate a moment on in the second section of this document to teach you the way.
So let’s begin with swapping the number plate bulb by going through the outside of your Fiat Doblo Cargo. Regardless it’s the front or the back of your vehicle the procedure will be identical.
Here are a few simple guidelines to follow to carry out this maintenance tasks:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this goal (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Fiat Doblo Cargo
- Use your screwdriver or knife to eject the bulb from its placement, in the event you are worried of breaking something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the achievement of the task.
.
How to change the number plate bulb on your Fiat Doblo Cargo without outside access
Second section of our document, replace this license plate bulb on your Fiat Doblo Cargo without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Fiat Doblo Cargo
To replace the one on the front plate, nothing could be simpler, you will have to position yourself under the vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to apply too much pressure otherwise you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.
How to replace the rear license plate bulb on my Fiat Doblo Cargo
Finally last solution, you must replace the bulb on the backplate of your Fiat Doblo Cargo, but you are not able to open the cover from the outside of your vehicle. In this case, here is the method to accomplish this task:
- Disconnect the battery from your Fiat Doblo Cargo
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Fiat Doblo Cargo, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main tactics for swapping license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this content. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Fiat Doblo Cargo. If you wish to change other bulbs like the position light bulbs on your Fiat Doblo Cargo or the low beam bulbs on Fiat Doblo Cargo, don’t hesitate to read our content articles which demonstrate you the operation to follow.
In the event that you have any additional questions about the Fiat Doblo Cargo, do not hesitate to consult our Fiat Doblo Cargo category.
