Regardless whether it’s for your personal safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are constantly operational is necessary. In fact, bulbs are wearing auto parts that will surely burn out over time and as a consequence need to be changed. You’re most likely on this site because one of your parking lights is burnt out and you’re struggling with how to change your Dodge Journey’s license plate bulb, we’ve written this content to help you do it all on your own and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Dodge Journey.
How to change the license plate bulb on your Dodge Journey throughout the outside
This option is the easiest of the two, actually, for this one you will simply require to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will take a moment on in the second section of this article to explain the way.
So let’s begin with swapping the number plate bulb by going through the outside of your Dodge Journey. Regardless whether it’s the front or the back of your vehicle the process will be the same.
Here are a few simple guidelines to stick to to conduct this maintenance:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this purpose (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Dodge Journey
- Use your screwdriver or knife to eject the bulb from its spot, in the event that you are afraid of breaking something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to confirm the successfulness of the procedure.
.
How to replace the number plate bulb on your Dodge Journey without outside access
Second section of our content page, change this license plate bulb on your Dodge Journey without external access. In most cases you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Dodge Journey
To change the one on the front plate, nothing could be easier, you will have to position yourself under the vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take out the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to put in too much force otherwise you will break the plastic cover), and you will just have to remove the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.
How to change the rear license plate bulb on my Dodge Journey
Finally last option, you must change the bulb on the backplate of your Dodge Journey, but you cannot really open the cover from the outside of your vehicle. In this case, here is the technique to execute this operation:
- Disconnect the battery from your Dodge Journey
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Dodge Journey, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main ways for swapping license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to accomplish it following the explanation of this document. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Dodge Journey. If you desire to change other bulbs like the position light bulbs on your Dodge Journey or the low beam bulbs on Dodge Journey, don’t hesitate to read our articles which describe you the operation to follow.
If you want more guides on the Dodge Journey, go to our Dodge Journey category.
