Regardless it’s for your own personal safety, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are always operational is necessary. Indeed, bulbs are wearing units that will surely burn out in the future and therefore need to be swapped out. You’re most certainly on the website because one of your parking lights is burnt out and you’re questioning how to change your Dodge Grand Caravan’s license plate bulb, we’ve created this document to help you do it all on your own and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Dodge Grand Caravan.
How to change the license plate bulb on your Dodge Grand Caravan throughout the outside
This solution is the fastest of the two, actually, for this one you will only need to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second part of this article content to clarify the way.
So let’s begin with changing the number plate bulb by going through the outside of your Dodge Grand Caravan. Regardless it’s the front or the back of your automobile the operation will be identical.
Here are a few simple guidelines to stick to to perform this maintenance tasks:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this goal (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Dodge Grand Caravan
- Use your screwdriver or knife to remove the bulb from its placement, if you are worried of breaking something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to validate the achievement of the procedure.
.
How to change the number plate bulb on your Dodge Grand Caravan without outside access
Second part of our document, change this license plate bulb on your Dodge Grand Caravan without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Dodge Grand Caravan
To change the one on the front plate, nothing could be simpler, you will have to position yourself under the automobile (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to exert too much force or you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.
How to change the rear license plate bulb on my Dodge Grand Caravan
Finally last solution, you must change the bulb on the backplate of your Dodge Grand Caravan, but you cannot really open the cover from the outside of your automobile. In such a case, here is the method to operate this operation:
- Disconnect the battery from your Dodge Grand Caravan
- Identify the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Dodge Grand Caravan, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main tactics for changing license plate bulbs on your car, take notice that on some models the method may be a bit different but you should be able to accomplish it following the outline of this document. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Dodge Grand Caravan. If you need to change other bulbs like the position light bulbs on your Dodge Grand Caravan or the low beam bulbs on Dodge Grand Caravan, don’t hesitate to consult our articles which describe you the process to follow.
If perhaps you have any further questions about the Dodge Grand Caravan, do not hesitate to consult our Dodge Grand Caravan category.
