Whether it’s for your own personal safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are all the time functional is extremely important. In fact, bulbs are wearing parts that will obviously burn out as time passes and therefore need to be changed. You’re almost certainly on this site because one of your parking lights is burnt out and you’re wanting to know how to change your Dodge Dart’s license plate bulb, we’ve made this article content to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Dodge Dart.
How to change the license plate bulb on your Dodge Dart coming from the outside
This method is the least difficult of the two, in reality, for this one you will only have to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will spend some time on in the second part of this document to demonstrate the method.
So let’s begin with replacing the number plate bulb by going through the outside of your Dodge Dart. Whether it’s the front or the back of your vehicle the process will be the same.
Here are a few simple guidelines to follow to execute this routine service:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Dodge Dart
- Use your screwdriver or knife to eject the bulb from its place, in the event you are worried of breaking something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to confirm the success of the process.
.
How to change the number plate bulb on your Dodge Dart without outside access
Second part of our content page, swap this license plate bulb on your Dodge Dart without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Dodge Dart
To change the one on the front plate, nothing could be less difficult, you will have to position yourself under the vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to put in too much pressure or you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.
How to change the rear license plate bulb on my Dodge Dart
Finally last possibility, you must change the bulb on the backplate of your Dodge Dart, but you are not able to open the cover from the outside of your vehicle. In this instance, here is the approach to execute this operation:
- Disconnect the battery from your Dodge Dart
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Dodge Dart, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main solutions for replacing license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to realize it following the outline of this article content. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Dodge Dart. If you desire to change other bulbs like the position light bulbs on your Dodge Dart or the low beam bulbs on Dodge Dart, don’t hesitate to browse our articles which demonstrate you the process to follow.
To discover more tips on the Dodge Dart, take a look at the Dodge Dart category.
