Regardless it’s for your own security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are all the time functioning is extremely important. In fact, bulbs are wearing units that will inevitably burn out over time and as a consequence need to be changed. You’re most certainly in this article because one of your parking lights is burnt out and you’re struggling with how to change your Dodge Caliber’s license plate bulb, we’ve created this article content to help you do it all on your own and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Dodge Caliber.

change-license-plate-bulb-dodge-caliber

How to swap the license plate bulb on your Dodge Caliber coming from the outside

This tactic is the simplest of the two, in fact, for this one you will only require to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate a moment on in the second part of this content to describe the approach.
So let’s start with swapping the number plate bulb by going through the outside of your Dodge Caliber. Regardless it’s the front or the back of your motor vehicle the operation will be similar.
Here are a few simple guidelines to follow to execute this maintenance tasks:

  • With the engine turned off, disconnect the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this goal (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Dodge Caliber
  • .

  • Use your screwdriver or knife to remove the bulb from its place, if you are scared of destroying something, you can as well do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and test the light to validate the successfulness of the task.

How to change the number plate bulb on your Dodge Caliber without outside access

Second part of our document, replace this license plate bulb on your Dodge Caliber without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).

How to swap the front license plate bulb on my Dodge Caliber

To swap the one on the front plate, nothing could be easier, you will have to put yourself under the motor vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually held by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to exert too much force or you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.

How to swap the rear license plate bulb on my Dodge Caliber

Finally last solution, you must swap the bulb on the backplate of your Dodge Caliber, but you cannot open the cover from the outside of your motor vehicle. In this instance, here is the approach to operate this task:

  • Disconnect the battery from your Dodge Caliber
  • Find the location of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, disconnect the holders for easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Dodge Caliber, test it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have found out the main methods for swapping license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to do it following the outline of this content. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Dodge Caliber. If you want to change other bulbs like the position light bulbs on your Dodge Caliber or the low beam bulbs on Dodge Caliber, don’t hesitate to read our articles which explain you the procedure to follow.

If you wish more guides on the Dodge Caliber, go to our Dodge Caliber category.