It doesn’t matter if it’s for your own security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are in every case working is very important. In fact, bulbs are wearing parts that will inevitably burn out after some time and consequently need to be changed. You’re most likely on this website because one of your parking lights is burnt out and you’re wanting to know how to change your Dacia Duster 2’s license plate bulb, we’ve created this content page to help you do it all on your own and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Dacia Duster 2.
How to replace the license plate bulb on your Dacia Duster 2 through the outside
This tactic is the most simple of the two, in truth, for this one you will only have to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate a moment on in the second part of this article to explain the way.
So let’s start with changing the number plate bulb by going through the outside of your Dacia Duster 2. It doesn’t matter if it’s the front or the back of your vehicle the technique will be similar.
Here are a few simple guidelines to follow to carry out this routine service:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Dacia Duster 2
- Use your screwdriver or knife to eject the bulb from its placement, in the event that you are worried of destroying a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to confirm the successfulness of the procedure.
.
How to replace the number plate bulb on your Dacia Duster 2 without outside access
Second part of our item, swap this license plate bulb on your Dacia Duster 2 without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Dacia Duster 2
To replace the one on the front plate, nothing could be simpler, you will have to put yourself under the vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take out the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to put in too much pressure otherwise you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Dacia Duster 2
Finally last solution, you must replace the bulb on the backplate of your Dacia Duster 2, but you cannot open the cover from the outside of your vehicle. In such a case, here is the method to perform this operation:
- Unplug the battery from your Dacia Duster 2
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Dacia Duster 2, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main solutions for changing license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to do it following the outline of this article content. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Dacia Duster 2. If you wish to change other bulbs like the position light bulbs on your Dacia Duster 2 or the low beam bulbs on Dacia Duster 2, don’t hesitate to read our articles which demonstrate you the operation to follow.
If perhaps you have any additional questions about the Dacia Duster 2, do not hesitate to consult our Dacia Duster 2 category.
