Regardless it’s for your own personal security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are always operational is extremely important. In fact, bulbs are wearing parts that will inevitably burn out as time passes and as a consequence need to be replaced. You’re most likely in this article because one of your parking lights is burnt out and you’re wanting to know how to change your Citroen Grand C4 Picasso’s license plate bulb, we’ve written this document to help you do it all on your own and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Citroen Grand C4 Picasso.

change-license-plate-bulb-citroen-grand-c4-picasso

How to replace the license plate bulb on your Citroen Grand C4 Picasso coming from the outside

This process is the quickest of the two, actually, for this one you will only need to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will take a moment on in the second part of this content to demonstrate the approach.
So let’s begin with changing the number plate bulb by going through the outside of your Citroen Grand C4 Picasso. Regardless it’s the front or the back of your car the operation will be the same.
Here are a few simple actions to stick to to perform this maintenance:

  • With the engine off, unplug the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this intent (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Citroen Grand C4 Picasso
  • .

  • Use your screwdriver or knife to remove the bulb from its spot, in the event you are afraid of destroying something, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and test the light to validate the successfulness of the task.

How to change the number plate bulb on your Citroen Grand C4 Picasso without outside access

Second part of our content, swap this license plate bulb on your Citroen Grand C4 Picasso without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Citroen Grand C4 Picasso

To replace the one on the front plate, nothing could be simpler, you will have to put yourself under the car (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to exert too much pressure or you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.

How to replace the rear license plate bulb on my Citroen Grand C4 Picasso

Finally last solution, you must replace the bulb on the backplate of your Citroen Grand C4 Picasso, but you cannot open the cover from the outside of your car. In this instance, here is the tactic to accomplish this operation:

  • Unplug the battery from your Citroen Grand C4 Picasso
  • Identify the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, unplug the holders for easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Citroen Grand C4 Picasso, test it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have found out the main tactics for changing license plate bulbs on your car, take notice that on some models the methodology may be a bit different but you should be able to do it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Citroen Grand C4 Picasso. If you need to change other bulbs like the position light bulbs on your Citroen Grand C4 Picasso or the low beam bulbs on Citroen Grand C4 Picasso, don’t be reluctant to browse our content articles which describe you the operation to follow.

To discover more tips on the Citroen Grand C4 Picasso, take a look at the Citroen Grand C4 Picasso category.