Regardless it’s for your own personal safety, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are all the time working is necessary. In fact, bulbs are wearing auto parts that will obviously burn out in the future and therefore need to be swapped out. You’re almost certainly on the website because one of your parking lights is burnt out and you’re wondering how to change your Chevrolet Volt’s license plate bulb, we’ve written this content to help you do it by yourself and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Chevrolet Volt.
How to swap the license plate bulb on your Chevrolet Volt through the outside
This method is the most simple of the two, in reality, for this one you will simply have to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second part of this content to teach you the approach.
So let’s start with changing the number plate bulb by going through the outside of your Chevrolet Volt. Regardless it’s the front or the back of your motor vehicle the procedure will be identical.
Here are a few simple steps to follow to execute this routine service:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Chevrolet Volt
- Use your screwdriver or knife to eject the bulb from its place, in the event that you are scared of damaging a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to validate the successfulness of the process.
.
How to replace the number plate bulb on your Chevrolet Volt without outside access
Second part of our content page, replace this license plate bulb on your Chevrolet Volt without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Chevrolet Volt
To swap the one on the front plate, nothing could be simpler, you will have to put yourself under the motor vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to exert too much force or you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and replace it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Chevrolet Volt
Finally last option, you must swap the bulb on the backplate of your Chevrolet Volt, but you cannot really open the cover from the outside of your motor vehicle. In this case, here is the solution to carry out this operation:
- Unplug the battery from your Chevrolet Volt
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Chevrolet Volt, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main methods for changing license plate bulbs on your car, remember that on some models the methodology may be a bit different but you should be able to do it following the explanation of this content page. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Chevrolet Volt. If you desire to change other bulbs like the position light bulbs on your Chevrolet Volt or the low beam bulbs on Chevrolet Volt, don’t hesitate to browse our content articles which explain you the operation to follow.
If you want more guides on the Chevrolet Volt, go to our Chevrolet Volt category.
