Regardless whether it’s for your own personal safety, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are always operational is necessary. In fact, bulbs are wearing parts that will obviously burn out over the years and consequently need to be replaced. You’re perhaps here because one of your parking lights is burnt out and you’re struggling with how to change your Chevrolet Traverse’s license plate bulb, we’ve written this article content to help you do it on your own and not have to go to your mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Chevrolet Traverse.
How to swap the license plate bulb on your Chevrolet Traverse throughout the outside
This approach is the quickest of the two, actually, for this one you will simply need to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second part of this document to teach you the method.
So let’s begin with changing the number plate bulb by going through the outside of your Chevrolet Traverse. Regardless whether it’s the front or the back of your automobile the technique will be identical.
Here are a few simple guidelines to stick to to carry out this maintenance tasks:
- With the engine off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this goal (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Chevrolet Traverse
- Use your screwdriver or knife to remove the bulb from its location, in the event you are scared of breaking a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the achievement of the process.
.
How to change the number plate bulb on your Chevrolet Traverse without outside access
Second part of our article, change this license plate bulb on your Chevrolet Traverse without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Chevrolet Traverse
To swap the one on the front plate, nothing could be easier, you will have to position yourself under the automobile (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much force or you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Chevrolet Traverse
Finally last solution, you must swap the bulb on the backplate of your Chevrolet Traverse, but you cannot open the cover from the outside of your automobile. In this case, here is the technique to execute this operation:
- Unplug the battery from your Chevrolet Traverse
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Chevrolet Traverse, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main methods for changing license plate bulbs on your car, take note that on some models the method may be a bit different but you should be able to realize it following the outline of this article. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Chevrolet Traverse. If you want to change other bulbs like the position light bulbs on your Chevrolet Traverse or the low beam bulbs on Chevrolet Traverse, don’t hesitate to consult our content articles which demonstrate you the process to follow.
If perhaps you have any further questions about the Chevrolet Traverse, do not hesitate to consult our Chevrolet Traverse category.
