Regardless it’s for your own security, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are in every case operational is extremely important. Indeed, bulbs are wearing auto parts that will predictably burn out after awhile and therefore need to be changed. You’re almost certainly on this website because one of your parking lights is burnt out and you’re struggling with how to change your Chevrolet HHR’s license plate bulb, we’ve made this article content to help you do it without any help and not have to go to your technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Chevrolet HHR.
How to replace the license plate bulb on your Chevrolet HHR through the outside
This solution is the quickest of the two, in truth, for this one you will only require to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second part of this article to teach you the way.
So let’s begin with replacing the number plate bulb by going through the outside of your Chevrolet HHR. Regardless it’s the front or the back of your motor vehicle the operation will be identical.
Here are a few simple actions to follow to perform this maintenance tasks:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this purpose (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Chevrolet HHR
- Use your screwdriver or knife to eject the bulb from its placement, if you are scared of damaging a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to confirm the successfulness of the operation.
.
How to replace the number plate bulb on your Chevrolet HHR without outside access
Second part of our document, change this license plate bulb on your Chevrolet HHR without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Chevrolet HHR
To replace the one on the front plate, nothing could be simpler, you will have to position yourself under the motor vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to exert too much pressure or you will break the plastic cover), and you will just have to take off the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Chevrolet HHR
Finally last possibility, you must replace the bulb on the backplate of your Chevrolet HHR, but you simply cannot open the cover from the outside of your motor vehicle. In this instance, here is the technique to execute this operation:
- Unplug the battery from your Chevrolet HHR
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Chevrolet HHR, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main ways for replacing license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to realize it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Chevrolet HHR. If you desire to change other bulbs like the position light bulbs on your Chevrolet HHR or the low beam bulbs on Chevrolet HHR, don’t be reluctant to consult our content articles which describe you the procedure to follow.
If you need more tutorials on the Chevrolet HHR, go to our Chevrolet HHR category.
