It doesn’t matter if it’s for your own personal security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are always functioning is really important. Indeed, bulbs are wearing auto parts that will surely burn out over time and as a consequence need to be swapped out. You’re almost certainly on the website because one of your parking lights is burnt out and you’re worried about how to change your Chevrolet Aveo’s license plate bulb, we’ve made this content page to help you do it by yourself and not have to go to your technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Chevrolet Aveo.
How to change the license plate bulb on your Chevrolet Aveo coming from the outside
This method is the easiest of the two, in fact, for this one you will just have to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this article content to describe the way.
So let’s begin with swapping the number plate bulb by going through the outside of your Chevrolet Aveo. It doesn’t matter if it’s the front or the back of your car the technique will be similar.
Here are a few simple steps to stick to to perform this maintenance:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Chevrolet Aveo
- Use your screwdriver or knife to eject the bulb from its location, in the event you are scared of damaging a thing, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to confirm the successfulness of the task.
.
How to replace the number plate bulb on your Chevrolet Aveo without outside access
Second part of our item, change this license plate bulb on your Chevrolet Aveo without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Chevrolet Aveo
To change the one on the front plate, nothing could be less hard, you will have to put yourself under the car (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to apply too much pressure otherwise you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to change the rear license plate bulb on my Chevrolet Aveo
Finally last option, you must change the bulb on the backplate of your Chevrolet Aveo, but you cannot open the cover from the outside of your car. In this case, here is the tactic to operate this task:
- Unplug the battery from your Chevrolet Aveo
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Chevrolet Aveo, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main methods for swapping license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to realize it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Chevrolet Aveo. If you wish to change other bulbs like the position light bulbs on your Chevrolet Aveo or the low beam bulbs on Chevrolet Aveo, don’t be reluctant to consult our content articles which describe you the operation to follow.
In the event that you have any further questions about the Chevrolet Aveo, do not hesitate to consult our Chevrolet Aveo category.
