It doesn’t matter if it’s for your specific safety, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are always functional is fundamental. Indeed, bulbs are wearing parts that will inevitably burn out over the years and consequently need to be changed. You’re most certainly here because one of your parking lights is burnt out and you’re wanting to know how to change your Cadillac SRX’s license plate bulb, we’ve created this article content to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Cadillac SRX.
How to swap the license plate bulb on your Cadillac SRX coming from the outside
This option is the simplest of the two, in reality, for this one you will only require to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this article to teach you the method.
So let’s start with changing the number plate bulb by going through the outside of your Cadillac SRX. It doesn’t matter if it’s the front or the back of your automobile the technique will be identical.
Here are a few simple guidelines to follow to execute this maintenance tasks:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this intent (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Cadillac SRX
- Use your screwdriver or knife to remove the bulb from its location, if you are afraid of destroying anything, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the success of the process.
.
How to replace the number plate bulb on your Cadillac SRX without outside access
Second part of our document, change this license plate bulb on your Cadillac SRX without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Cadillac SRX
To swap the one on the front plate, nothing could be much easier, you will have to put yourself under the automobile (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to put in too much pressure otherwise you will break the plastic cover), and you will only have to take out the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Cadillac SRX
Finally last possibility, you must swap the bulb on the backplate of your Cadillac SRX, but you cannot open the cover from the outside of your automobile. In this case, here is the technique to operate this operation:
- Disconnect the battery from your Cadillac SRX
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Cadillac SRX, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main techniques for changing license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to realize it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Cadillac SRX. If you need to change other bulbs like the position light bulbs on your Cadillac SRX or the low beam bulbs on Cadillac SRX, don’t be reluctant to consult our articles which explain you the procedure to follow.
In the event that you have any additional questions about the Cadillac SRX, do not hesitate to consult our Cadillac SRX category.
