Regardless it’s for your specific security, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are in every case functional is necessary. In fact, bulbs are wearing parts that will surely burn out over time and therefore need to be swapped out. You’re likely on this website because one of your parking lights is burnt out and you’re struggling with how to change your BMW X6’s license plate bulb, we’ve written this article content to help you do it all on your own and not have to go to your motor mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your BMW X6.

change-license-plate-bulb-bmw-x6

How to replace the license plate bulb on your BMW X6 coming from the outside

This solution is the simplest of the two, in fact, for this one you will only have to take out the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second section of this content to explain the way.
So let’s start with swapping the number plate bulb by going through the outside of your BMW X6. Regardless it’s the front or the back of your automobile the operation will be identical.
Here are a few simple steps to stick to to perform this maintenance tasks:

  • With the engine off, disconnect the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your BMW X6
  • .

  • Use your screwdriver or knife to eject the bulb from its location, if you are scared of destroying a thing, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and test the light to validate the successfulness of the process.

How to replace the number plate bulb on your BMW X6 without outside access

Second section of our article, swap this license plate bulb on your BMW X6 without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my BMW X6

To replace the one on the front plate, nothing could be less difficult, you will have to put yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to exert too much force otherwise you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.

How to replace the rear license plate bulb on my BMW X6

Finally last possibility, you must replace the bulb on the backplate of your BMW X6, but you simply cannot open the cover from the outside of your automobile. In this instance, here is the method to do this task:

  • Unplug the battery from your BMW X6
  • Find the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, disconnect the holders for much easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your BMW X6, test it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have discovered the main ways for swapping license plate bulbs on your car, bear in mind that on some models the methodology may be a bit different but you should be able to realize it following the outline of this article. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your BMW X6. If you want to change other bulbs like the position light bulbs on your BMW X6 or the low beam bulbs on BMW X6, don’t hesitate to browse our articles which explain you the procedure to follow.

If you have any further questions about the BMW X6, do not hesitate to consult our BMW X6 category.