It doesn’t matter if it’s for your personal safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are constantly functioning is fundamental. In reality, bulbs are wearing units that will undoubtedly burn out after awhile and therefore need to be swapped out. You’re most certainly in this article because one of your parking lights is burnt out and you’re wondering how to change your Bmw X2’s license plate bulb, we’ve written and published this document to help you do it all on your own and not have to go to your technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Bmw X2.
How to change the license plate bulb on your Bmw X2 throughout the outside
This technique is the quickest of the two, actually, for this one you will just have to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second part of this article content to demonstrate the way.
So let’s begin with replacing the number plate bulb by going through the outside of your Bmw X2. It doesn’t matter if it’s the front or the back of your vehicle the operation will be the same.
Here are a few simple actions to follow to execute this service:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this intent (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Bmw X2
- Use your screwdriver or knife to eject the bulb from its location, in the event you are worried of damaging something, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to confirm the success of the task.
.
How to change the number plate bulb on your Bmw X2 without outside access
Second part of our article, replace this license plate bulb on your Bmw X2 without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Bmw X2
To change the one on the front plate, nothing could be less hard, you will have to put yourself under the vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much force or you will break the plastic cover), and you will only have to take out the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to change the rear license plate bulb on my Bmw X2
Finally last option, you must change the bulb on the backplate of your Bmw X2, but you cannot really open the cover from the outside of your vehicle. In such a case, here is the method to execute this operation:
- Disconnect the battery from your Bmw X2
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Bmw X2, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main ways for replacing license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to do it following the explanation of this article content. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Bmw X2. If you need to change other bulbs like the position light bulbs on your Bmw X2 or the low beam bulbs on Bmw X2, don’t be reluctant to read our articles which explain you the procedure to follow.
To get more tips on the Bmw X2, take a look at the Bmw X2 category.
