Regardless whether it’s for your own personal safety, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are all the time operational is extremely important. In reality, bulbs are wearing units that will predictably burn out after some time and consequently need to be replaced. You’re quite likely on this website because one of your parking lights is burnt out and you’re wanting to know how to change your Bmw Serie 5’s license plate bulb, we’ve made this document to help you do it without any help and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Bmw Serie 5.
How to change the license plate bulb on your Bmw Serie 5 through the outside
This process is the fastest of the two, in fact, for this one you will simply need to take out the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second section of this article to clarify the approach.
So let’s start with swapping the number plate bulb by going through the outside of your Bmw Serie 5. Regardless whether it’s the front or the back of your automobile the procedure will be similar.
Here are a few simple guidelines to stick to to conduct this maintenance:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this purpose (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Bmw Serie 5
- Use your screwdriver or knife to eject the bulb from its spot, in the event that you are afraid of damaging anything, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the achievement of the procedure.
.
How to change the number plate bulb on your Bmw Serie 5 without outside access
Second section of our article, change this license plate bulb on your Bmw Serie 5 without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Bmw Serie 5
To change the one on the front plate, nothing could be less difficult, you will have to position yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take out the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to exert too much pressure or you will break the plastic cover), and you will only have to take out the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Bmw Serie 5
Finally last solution, you must change the bulb on the backplate of your Bmw Serie 5, but you cannot open the cover from the outside of your automobile. In such a case, here is the tactic to operate this task:
- Unplug the battery from your Bmw Serie 5
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Bmw Serie 5, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main solutions for swapping license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to realize it following the explanation of this document. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Bmw Serie 5. If you want to change other bulbs like the position light bulbs on your Bmw Serie 5 or the low beam bulbs on Bmw Serie 5, don’t hesitate to read our content articles which demonstrate you the procedure to follow.
If you have any further questions about the Bmw Serie 5, do not hesitate to consult our Bmw Serie 5 category.
