It doesn’t matter if it’s for your personal safety, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are constantly effective is necessary. In reality, bulbs are wearing parts that will obviously burn out after some time and as a result need to be changed. You’re likely on this website because one of your parking lights is burnt out and you’re worried about how to change your Bmw Serie 4 F33’s license plate bulb, we’ve made this article to help you do it on your own and not have to go to your auto mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Bmw Serie 4 F33.
How to replace the license plate bulb on your Bmw Serie 4 F33 through the outside
This tactic is the least difficult of the two, in reality, for this one you will only require to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate a moment on in the second section of this article content to show you the approach.
So let’s begin with changing the number plate bulb by going through the outside of your Bmw Serie 4 F33. It doesn’t matter if it’s the front or the back of your car the method will be similar.
Here are a few simple guidelines to stick to to conduct this routine service:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this intent (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Bmw Serie 4 F33
- Use your screwdriver or knife to remove the bulb from its location, in the event you are worried of breaking something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the success of the operation.
.
How to change the number plate bulb on your Bmw Serie 4 F33 without outside access
Second section of our content, swap this license plate bulb on your Bmw Serie 4 F33 without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Bmw Serie 4 F33
To replace the one on the front plate, nothing could be less difficult, you will have to position yourself under the car (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general held by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to apply too much force otherwise you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.
How to replace the rear license plate bulb on my Bmw Serie 4 F33
Finally last option, you must replace the bulb on the backplate of your Bmw Serie 4 F33, but you are not able to open the cover from the outside of your car. In this case, here is the method to operate this task:
- Unplug the battery from your Bmw Serie 4 F33
- Identify the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Bmw Serie 4 F33, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main techniques for changing license plate bulbs on your car, bear in mind that on some models the methodology may be a bit different but you should be able to realize it following the outline of this article. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Bmw Serie 4 F33. If you need to change other bulbs like the position light bulbs on your Bmw Serie 4 F33 or the low beam bulbs on Bmw Serie 4 F33, don’t be reluctant to browse our content articles which explain you the procedure to follow.
If you wish more guides on the Bmw Serie 4 F33, go to our Bmw Serie 4 F33 category.
