Regardless it’s for your own safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are constantly working is fundamental. Indeed, bulbs are wearing parts that will undoubtedly burn out in the future and as a result need to be changed. You’re quite likely in this article because one of your parking lights is burnt out and you’re questioning how to change your Bmw Serie 3’s license plate bulb, we’ve written and published this article content to help you do it on your own and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Bmw Serie 3.
How to change the license plate bulb on your Bmw Serie 3 through the outside
This tactic is the quickest of the two, in fact, for this one you will simply have to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will spend some time on in the second section of this document to show you the approach.
So let’s start with swapping the number plate bulb by going through the outside of your Bmw Serie 3. Regardless it’s the front or the back of your car the process will be similar.
Here are a few simple actions to stick to to conduct this service:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Bmw Serie 3
- Use your screwdriver or knife to eject the bulb from its location, if you are scared of damaging something, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to validate the successfulness of the task.
.
How to change the number plate bulb on your Bmw Serie 3 without outside access
Second section of our content, change this license plate bulb on your Bmw Serie 3 without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Bmw Serie 3
To change the one on the front plate, nothing could be much easier, you will have to put yourself under the car (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to put in too much pressure otherwise you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to change the rear license plate bulb on my Bmw Serie 3
Finally last option, you must change the bulb on the backplate of your Bmw Serie 3, but you simply cannot open the cover from the outside of your car. In such a case, here is the approach to execute this task:
- Disconnect the battery from your Bmw Serie 3
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Bmw Serie 3, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main solutions for swapping license plate bulbs on your car, remember that on some models the technique may be a bit different but you should be able to realize it following the outline of this content page. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Bmw Serie 3. If you want to change other bulbs like the position light bulbs on your Bmw Serie 3 or the low beam bulbs on Bmw Serie 3, don’t hesitate to consult our articles which explain you the process to follow.
If perhaps you have any further questions about the Bmw Serie 3, do not hesitate to consult our Bmw Serie 3 category.
