Whether it’s for your own safety, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are all the time effective is very important. In fact, bulbs are wearing units that will inevitably burn out with time and as a consequence need to be swapped out. You’re almost certainly here because one of your parking lights is burnt out and you’re wondering how to change your Bmw Serie 3 F30’s license plate bulb, we’ve created this article content to help you do it all on your own and not have to go to your technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Bmw Serie 3 F30.
How to replace the license plate bulb on your Bmw Serie 3 F30 throughout the outside
This tactic is the simplest of the two, actually, for this one you will only need to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second section of this document to demonstrate the approach.
So let’s start with replacing the number plate bulb by going through the outside of your Bmw Serie 3 F30. Whether it’s the front or the back of your automobile the technique will be the same.
Here are a few simple steps to follow to conduct this service:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Bmw Serie 3 F30
- Use your screwdriver or knife to eject the bulb from its spot, in the event that you are worried of damaging something, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the successfulness of the process.
.
How to change the number plate bulb on your Bmw Serie 3 F30 without outside access
Second section of our item, change this license plate bulb on your Bmw Serie 3 F30 without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Bmw Serie 3 F30
To replace the one on the front plate, nothing could be simpler, you will have to put yourself under the automobile (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to exert too much force or you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Bmw Serie 3 F30
Finally last option, you must replace the bulb on the backplate of your Bmw Serie 3 F30, but you are not able to open the cover from the outside of your automobile. In such a case, here is the approach to execute this operation:
- Disconnect the battery from your Bmw Serie 3 F30
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Bmw Serie 3 F30, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main techniques for replacing license plate bulbs on your car, take note that on some models the technique may be a bit different but you should be able to realize it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Bmw Serie 3 F30. If you need to change other bulbs like the position light bulbs on your Bmw Serie 3 F30 or the low beam bulbs on Bmw Serie 3 F30, don’t be reluctant to consult our articles which demonstrate you the operation to follow.
To get more tips on the Bmw Serie 3 F30, take a look at the Bmw Serie 3 F30 category.
