Regardless it’s for your personal safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are all the time operational is necessary. In fact, bulbs are wearing parts that will inevitably burn out in the future and as a result need to be swapped out. You’re most certainly here because one of your parking lights is burnt out and you’re worried about how to change your Bmw Serie 3 E93’s license plate bulb, we’ve made this article content to help you do it without any help and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Bmw Serie 3 E93.
How to replace the license plate bulb on your Bmw Serie 3 E93 coming from the outside
This tactic is the quickest of the two, actually, for this one you will just require to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second section of this content page to clarify the approach.
So let’s start with changing the number plate bulb by going through the outside of your Bmw Serie 3 E93. Regardless it’s the front or the back of your car the technique will be identical.
Here are a few simple guidelines to follow to carry out this maintenance:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this goal (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Bmw Serie 3 E93
- Use your screwdriver or knife to remove the bulb from its spot, if you are worried of destroying a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the successfulness of the process.
.
How to replace the number plate bulb on your Bmw Serie 3 E93 without outside access
Second section of our article, swap this license plate bulb on your Bmw Serie 3 E93 without external access. In most cases you will be able to access it, however some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Bmw Serie 3 E93
To replace the one on the front plate, nothing could be less difficult, you will have to position yourself under the car (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take away the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to exert too much force or you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.
How to replace the rear license plate bulb on my Bmw Serie 3 E93
Finally last possibility, you must replace the bulb on the backplate of your Bmw Serie 3 E93, but you simply cannot open the cover from the outside of your car. In this instance, here is the approach to do this operation:
- Disconnect the battery from your Bmw Serie 3 E93
- Identify the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Bmw Serie 3 E93, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for changing license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to accomplish it following the outline of this document. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Bmw Serie 3 E93. If you need to change other bulbs like the position light bulbs on your Bmw Serie 3 E93 or the low beam bulbs on Bmw Serie 3 E93, don’t hesitate to browse our articles which describe you the procedure to follow.
If you need more tutorials on the Bmw Serie 3 E93, go to our Bmw Serie 3 E93 category.
