It doesn’t matter if it’s for your personal security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly functioning is necessary. In fact, bulbs are wearing units that will undoubtedly burn out over time and consequently need to be swapped out. You’re likely in this article because one of your parking lights is burnt out and you’re wanting to know how to change your Bmw Serie 3 E92’s license plate bulb, we’ve written this article content to help you do it by yourself and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Bmw Serie 3 E92.

change-license-plate-bulb-bmw-serie-3-e92

How to replace the license plate bulb on your Bmw Serie 3 E92 through the outside

This process is the quickest of the two, in reality, for this one you will simply require to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second part of this article to explain the method.
So let’s start with changing the number plate bulb by going through the outside of your Bmw Serie 3 E92. It doesn’t matter if it’s the front or the back of your motor vehicle the method will be identical.
Here are a few simple actions to follow to conduct this maintenance:

  • With the engine off, disconnect the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this purpose (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Bmw Serie 3 E92
  • .

  • Use your screwdriver or knife to remove the bulb from its place, in the event you are afraid of damaging anything, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and check the light to validate the achievement of the task.

How to replace the number plate bulb on your Bmw Serie 3 E92 without outside access

Second part of our content, replace this license plate bulb on your Bmw Serie 3 E92 without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Bmw Serie 3 E92

To replace the one on the front plate, nothing could be easier, you will have to put yourself under the motor vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to put in too much pressure or you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.

How to replace the rear license plate bulb on my Bmw Serie 3 E92

Finally last solution, you must replace the bulb on the backplate of your Bmw Serie 3 E92, but you cannot really open the cover from the outside of your motor vehicle. In this instance, here is the solution to execute this operation:

  • Unplug the battery from your Bmw Serie 3 E92
  • Find the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, disconnect the holders for less complicated access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Bmw Serie 3 E92, check it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have learned the main solutions for changing license plate bulbs on your car, take notice that on some models the technique may be a bit different but you should be able to accomplish it following the outline of this article content. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Bmw Serie 3 E92. If you need to change other bulbs like the position light bulbs on your Bmw Serie 3 E92 or the low beam bulbs on Bmw Serie 3 E92, don’t hesitate to consult our content articles which explain you the process to follow.

If you need more tutorials on the Bmw Serie 3 E92, go to our Bmw Serie 3 E92 category.