Regardless whether it’s for your own personal safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are constantly operational is fundamental. Indeed, bulbs are wearing units that will undoubtedly burn out over the years and therefore need to be replaced. You’re likely here because one of your parking lights is burnt out and you’re wanting to know how to change your Bmw Serie 2’s license plate bulb, we’ve created this content to help you do it without any help and not have to go to your technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Bmw Serie 2.
How to swap the license plate bulb on your Bmw Serie 2 through the outside
This solution is the simplest of the two, in truth, for this one you will simply have to take out the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second section of this article content to describe the approach.
So let’s begin with swapping the number plate bulb by going through the outside of your Bmw Serie 2. Regardless whether it’s the front or the back of your automobile the procedure will be identical.
Here are a few simple steps to follow to carry out this service:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this purpose (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Bmw Serie 2
- Use your screwdriver or knife to eject the bulb from its spot, if you are scared of destroying something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the success of the task.
.
How to replace the number plate bulb on your Bmw Serie 2 without outside access
Second section of our content page, swap this license plate bulb on your Bmw Serie 2 without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Bmw Serie 2
To swap the one on the front plate, nothing could be less difficult, you will have to position yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to put in too much pressure or you will break the plastic cover), and you will only have to take out the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.
How to swap the rear license plate bulb on my Bmw Serie 2
Finally last possibility, you must swap the bulb on the backplate of your Bmw Serie 2, but you cannot really open the cover from the outside of your automobile. In this instance, here is the technique to conduct this operation:
- Unplug the battery from your Bmw Serie 2
- Identify the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Bmw Serie 2, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main solutions for swapping license plate bulbs on your car, take notice that on some models the methodology may be a bit different but you should be able to accomplish it following the explanation of this article content. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Bmw Serie 2. If you desire to change other bulbs like the position light bulbs on your Bmw Serie 2 or the low beam bulbs on Bmw Serie 2, don’t hesitate to consult our articles which explain you the operation to follow.
Whenever you have any further questions about the Bmw Serie 2, do not hesitate to consult our Bmw Serie 2 category.
