Whether it’s for your personal security, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are always working is fundamental. In fact, bulbs are wearing units that will surely burn out after some time and as a result need to be changed. You’re probably on this website because one of your parking lights is burnt out and you’re questioning how to change your Bmw Serie 2 F22’s license plate bulb, we’ve created this content to help you do it on your own and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Bmw Serie 2 F22.

change-license-plate-bulb-bmw-serie-2-f22

How to change the license plate bulb on your Bmw Serie 2 F22 through the outside

This method is the easiest of the two, in truth, for this one you will just need to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second section of this article content to demonstrate the method.
So let’s start with changing the number plate bulb by going through the outside of your Bmw Serie 2 F22. Whether it’s the front or the back of your vehicle the process will be similar.
Here are a few simple guidelines to stick to to execute this routine service:

  • With the engine off, unplug the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this goal (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Bmw Serie 2 F22
  • .

  • Use your screwdriver or knife to remove the bulb from its place, in the event you are scared of destroying something, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and check the light to confirm the successfulness of the process.

How to change the number plate bulb on your Bmw Serie 2 F22 without outside access

Second section of our document, replace this license plate bulb on your Bmw Serie 2 F22 without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Bmw Serie 2 F22

To change the one on the front plate, nothing could be less difficult, you will have to put yourself under the vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general held by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to put in too much force otherwise you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.

How to change the rear license plate bulb on my Bmw Serie 2 F22

Finally last possibility, you must change the bulb on the backplate of your Bmw Serie 2 F22, but you are not able to open the cover from the outside of your vehicle. In this instance, here is the solution to operate this operation:

  • Unplug the battery from your Bmw Serie 2 F22
  • Locate the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
  • Once found, before removing the bulb holders, unplug the holders for much easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Bmw Serie 2 F22, check it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have discovered the main solutions for changing license plate bulbs on your car, remember that on some models the method may be a bit different but you should be able to do it following the outline of this document. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Bmw Serie 2 F22. If you desire to change other bulbs like the position light bulbs on your Bmw Serie 2 F22 or the low beam bulbs on Bmw Serie 2 F22, don’t be reluctant to browse our articles which describe you the operation to follow.

In the event that you have any further questions about the Bmw Serie 2 F22, do not hesitate to consult our Bmw Serie 2 F22 category.