It doesn’t matter if it’s for your specific security, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are constantly effective is very important. Indeed, bulbs are wearing units that will undoubtedly burn out over time and as a consequence need to be changed. You’re likely here because one of your parking lights is burnt out and you’re worried about how to change your Bmw Serie 1’s license plate bulb, we’ve created this document to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Bmw Serie 1.
How to change the license plate bulb on your Bmw Serie 1 through the outside
This tactic is the easiest of the two, actually, for this one you will just require to remove the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will take a moment on in the second part of this content to describe the way.
So let’s begin with changing the number plate bulb by going through the outside of your Bmw Serie 1. It doesn’t matter if it’s the front or the back of your car the technique will be the same.
Here are a few simple steps to stick to to carry out this service:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this goal (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Bmw Serie 1
- Use your screwdriver or knife to eject the bulb from its placement, in the event that you are afraid of breaking a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to confirm the achievement of the process.
.
How to replace the number plate bulb on your Bmw Serie 1 without outside access
Second part of our content page, change this license plate bulb on your Bmw Serie 1 without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Bmw Serie 1
To change the one on the front plate, nothing could be much easier, you will have to put yourself under the car (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general held by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to exert too much pressure otherwise you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to change the rear license plate bulb on my Bmw Serie 1
Finally last solution, you must change the bulb on the backplate of your Bmw Serie 1, but you are not able to open the cover from the outside of your car. In this instance, here is the solution to operate this operation:
- Disconnect the battery from your Bmw Serie 1
- Identify the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Bmw Serie 1, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main techniques for changing license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to realize it following the outline of this content. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Bmw Serie 1. If you desire to change other bulbs like the position light bulbs on your Bmw Serie 1 or the low beam bulbs on Bmw Serie 1, don’t be reluctant to consult our articles which explain you the procedure to follow.
If you wish more tutorials on the Bmw Serie 1, go to our Bmw Serie 1 category.
