Regardless whether it’s for your own personal safety, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are in every case working is really important. Indeed, bulbs are wearing units that will surely burn out as time passes and therefore need to be replaced. You’re perhaps on the website because one of your parking lights is burnt out and you’re questioning how to change your BMW 7 Series’s license plate bulb, we’ve written and published this article to help you do it by yourself and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your BMW 7 Series.
How to swap the license plate bulb on your BMW 7 Series coming from the outside
This method is the most simple of the two, in reality, for this one you will only have to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second section of this article to clarify the approach.
So let’s start with replacing the number plate bulb by going through the outside of your BMW 7 Series. Regardless whether it’s the front or the back of your motor vehicle the technique will be the same.
Here are a few simple steps to follow to conduct this service:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your BMW 7 Series
- Use your screwdriver or knife to eject the bulb from its location, if you are afraid of damaging a thing, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to confirm the achievement of the operation.
.
How to replace the number plate bulb on your BMW 7 Series without outside access
Second section of our article, replace this license plate bulb on your BMW 7 Series without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my BMW 7 Series
To swap the one on the front plate, nothing could be less complicated, you will have to position yourself under the motor vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to apply too much force otherwise you will break the plastic cover), and you will only have to take out the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.
How to swap the rear license plate bulb on my BMW 7 Series
Finally last option, you must swap the bulb on the backplate of your BMW 7 Series, but you are not able to open the cover from the outside of your motor vehicle. In this case, here is the tactic to conduct this task:
- Disconnect the battery from your BMW 7 Series
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your BMW 7 Series, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main tactics for replacing license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to do it following the outline of this content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your BMW 7 Series. If you desire to change other bulbs like the position light bulbs on your BMW 7 Series or the low beam bulbs on BMW 7 Series, don’t be reluctant to consult our content articles which describe you the process to follow.
To find more tips on the BMW 7 Series, take a look at the BMW 7 Series category.
